1935 Rafton Rd, Apopka, FL 32703

Call or text us

Need a wind mitigation inspection in Orlando, FL? Home Pros Roofing and Contracting arranges wind mitigation inspections through partner companies whose licensed inspectors complete and sign the state form, and as a roofer we help with what that report shows about your roof. Home Pros is a licensed Florida roofing contractor based in Apopka and serving Central Florida, Orlando included, since 2015. Our phone is answered 24/7, and we fill out Citizens and insurance roof inspection forms whenever an insurer wants one.

Most of what a wind mitigation report grades sits in or under the roof: deck nailing, roof to wall connections, what lies under the shingles or tile, and when the covering was permitted. This guide explains the form in plain language, how Orlando homes tend to score, and which roof work can change the answers.

What a wind mitigation inspection is

A wind mitigation inspection is a visit by a qualified inspector who records the features of your home that help it resist hurricane winds. The results go on the Uniform Mitigation Verification Inspection Form, Form OIR-B1-1802, adopted by rule through the Florida Office of Insurance Regulation (OIR). Your insurer uses the signed form to apply the wind mitigation credits it has on file.

Two Florida laws sit behind the form. Section 627.0629 of the Florida Statutes says a residential property insurance rate filing must include actuarially reasonable discounts, credits or other rate differentials, or reductions in deductibles, for homes with fixtures or construction techniques shown to reduce windstorm loss. Section 627.711 requires insurers to tell policyholders about those discounts when a policy is issued and at each renewal, and to accept a uniform mitigation verification form signed by an authorized mitigation inspector. That section lists who may sign, such as licensed home inspectors who completed hurricane mitigation training, certified building code inspectors, professional engineers and architects.

The form changed this year. OIR adopted a revised version, OIR-B1-1802 (Rev. 04/26), and the Florida Department of Financial Services says it must be used for all inspections as of April 1, 2026. Inspections done before that date could use the 2012 version, which had seven questions. The new form has nine, adds questions on wind speed region and roof slope, splits the building code question into the 2001 and 2004 codes versus 2007 and later, and spells out the photos or documents that must back each answer. A completed form is valid for up to five years as long as no material changes are made to the structure and no inaccuracies are found on it.

The nine questions on the 2026 form, in plain language

Here is what the current form asks. Only the inspector decides the answers; these notes explain what is being checked.

  1. Building code. Which Florida Building Code (FBC) was in force when the original building permit was applied for: FBC 2001 and 2004, FBC 2007 or later, or unknown. For homes built in 2002 or 2003 the form wants a permit application dated after March 1, 2002, and for homes built in 2007 or 2008 a permit application dated after December 8, 2006.
  2. Region. The design wind speed region for your address, based on the 2022 edition of the ASCE 7 standard. The inspector looks this up for your exact parcel.
  3. Roof slope. Whether the slope covering at least two thirds of the main roof area is 6 in 12 or steeper, or flatter than that.
  4. Roof covering. Every covering on the house (asphalt or fiberglass shingle, concrete or clay tile, synthetic tile, metal, built up or membrane) with a permit application date or a Florida or Miami Dade product approval number, plus the year it was installed. The strongest answer needs every covering to meet the code, for example through a roofing permit application dated on or after March 1, 2002, or an original roof on a home built in 2004 or later.
  5. Roof deck attachment. The weakest way the plywood or OSB sheathing is fastened to the trusses, checked from the attic. The form separates staples or 6d nails at 6 inches on the edges and 12 inches in the field, 8d common nails no more than 12 inches apart in the field, and 8d common nails no more than 6 inches apart in the field. Sheathing must be at least 7/16 inch thick on trusses no more than 24 inches apart.
  6. Roof to wall attachment. The weakest connection between the trusses or rafters and the walls: toe nails, clips, single wraps, double wraps or structural anchors. Hip and valley jacks within five feet of a roof corner are left out, and a metal connector that was not installed as intended counts as the weaker answer.
  7. Roof geometry. Whether the roof counts as a hip roof. A roof qualifies only when other shapes, such as gable ends, make up no more than 10 percent of the total roof perimeter. Most single family homes are graded either hip or other.
  8. Sealed roof deck, also called secondary water resistance. A layer meant to keep water out if the shingles or tiles blow off. The form accepts a fully adhered polymer modified bitumen underlayment meeting ASTM D1970, self adhering tape over the deck seams under felt or synthetic, a double layer of qualifying felt or synthetic underlayment, or qualifying spray foam. Standard underlayment or hot mopped felt alone does not count.
  9. Opening protection. The weakest protection on windows, entry doors, sliding glass doors, skylights and garage doors, from verified impact rated products down to none. Damaged openings that need repair or replacement disqualify the home from wind mitigation rate differentials no matter what else it has.

Every answer from question 2 through question 9 needs at least one photo or document as proof, and a FORTIFIED Home certificate can stand in for several of them. The insurer may also ask follow up questions about any feature the form verifies.

Orlando homes: age, roof type and how they tend to score

Orlando has neighborhoods from nearly every era of Florida building, and the date a house was permitted drives several answers. Use this as a general guide, not a prediction for any one home:

Roof type matters as well. From what we see across the area (an observation, not a survey), architectural shingle covers most production homes, concrete tile is common in master planned communities, and metal shows up on a smaller share of houses. A tile or metal roof needs its permit date or product approval number on file to pass the roof covering question. Many Orlando homes mix hips with gables over garages and entries, so some that look hipped from the street can land in the other category under the 10 percent limit.

How roof work can change your report

The roof questions are the ones a roofer can actually change. Under the Florida Building Code, Existing Building, 8th Edition (2023), section 706.7, when the roof covering on a home with a wood roof deck is removed and replaced, the roofing contractor is permitted to bring the deck fastening up to section 706.7.1 and to add a secondary water barrier under section 706.7.2. Homes permitted under the Florida Building Code are exempt from that section, so it matters most on older homes. For wood panel decks held down with staples or 6d nails, the code table calls for supplemental ring shank nails no more than 6 inches apart.

A separate rule, section 706.8, requires roof to wall connections to be improved during a reroof only on certain higher value homes in the wind borne debris region as the code defines it, and caps that retrofit at a 15 percent increase in the cost of reroofing. Ask us whether it applies to your address.

In practice, a tear off is the one time the whole deck is exposed, so added nailing can be installed and photographed, and a sealed deck such as self adhering underlayment or taped seams goes on before the new covering. A new permitted roof with a current product approval gives the inspector the permit date and approval number the form asks for. Adding roof to wall straps or clips during a reroof depends on the framing, and we tell you plainly what your house allows before any work starts.

Records matter as much as the work. Citizens Property Insurance lists roofing permits, work orders and invoices, receipts with product specifications and notice of acceptance letters as acceptable documentation for mitigation features. Keep the permit, product approval numbers and photos of the deck nailing and underlayment from your reroof for the inspector. If you update features after a report is on file, Citizens says you can ask for any eligible discounts by notifying Citizens and your agent, and a new inspection may be required.

Learn more about roof replacement, asphalt shingle roofs, tile roofs and metal roofs. For smaller problems, see roof repair.

Permits and HOA rules: City of Orlando or Orange County

City of Orlando. Inside city limits, a reroof goes through City of Orlando Permitting Services, and the residential re roofing form asks about the underlayment, the roof covering and the fastener types. Since January 1, 2020 the city has required a dry in, or in progress, inspection (inspection code 125) on residential and commercial reroofs, and a completed inspection affidavit at final that verifies the roof decking nail down and the secondary water barrier. That paper trail later helps prove two wind report answers. Past city permits can be found with the Permit Lookup tool.

Unincorporated Orange County. Pine Hills, Conway and other places with an Orlando mailing address are outside city limits, so roof permits there go through the county’s Fast Track system. The county asks for the type of work (such as Re Roof), roof square footage, stories and roofing material.

To find out which applies, the City of Orlando “Do I Live in City Limits?” lookup and your Orange County Property Appraiser record both help, and the property appraiser record also lists the year built, which feeds the building code question.

HOA approval. Section 720.3035(6) of the Florida Statutes requires each HOA board or architectural committee to adopt hurricane protection specifications. It may not deny hurricane protection that follows them, which the statute says includes roof systems recognized by the Florida Building Code that meet the 2022 edition of ASCE 7, though it can hold you to the community’s unified building scheme for appearance.

Storms and insurance in Orlando

The Atlantic hurricane season officially runs June 1 through November 30. Orlando sits inland, yet recent storms show why insurers ask about roofs here:

Section 627.0629 also requires each insurer, effective October 1, 2023, to describe the hurricane mitigation discounts it offers on its website, reachable from its home page. Credits differ between companies, so check there or ask your agent. Citizens says it may verify any wind mitigation form by ordering an independent inspection.

If a storm already damaged your roof, fix that first. See storm damage roof repair in Orlando, hail damage roof repair in Orlando or, for an active leak, emergency roof repair in Orlando.

Wind mitigation, 4 point and Citizens roof forms compared

Insurers often ask for more than one report at a time, and each one does a different job:

Roof age is its own issue. Under section 627.7011(5) of the Florida Statutes, an insurer may not refuse to issue or renew a homeowners policy solely because of the age of a roof that is less than 15 years old, and an older roof that an authorized inspection shows has 5 years or more of useful life left cannot be refused on age alone. Our page on roof inspection for insurance covers those letters in more detail.

My Safe Florida Home in 2026

My Safe Florida Home is the state program run by the Florida Department of Financial Services. For eligible homeowners it assigns an authorized wind mitigation inspector and offers grants for approved upgrades such as roof improvements, impact windows and doors, garage door reinforcement and secondary water barrier installation. As of mid November 2026, WFLX reported that the applicant portal was temporarily closed for website improvements and expected to relaunch on December 4, with existing applications kept secure. Check mysafeflhome.com for the current status, and read the program rules on approved work before you sign any contract you hope it will help pay for.

Looking at the grant side? Our My Safe Florida Home roof grant guide explains who qualifies in Central Florida, the three roof improvements the program can fund and the December 4, 2026 portal reopening date the program has announced.

How to book a wind mitigation inspection through Home Pros

  1. Call us. Reach us 24/7 at 407-766-4388. Tell us the address, year built, roof age and your insurer’s deadline.
  2. We set up the inspection. Home Pros arranges it with one of our partner companies, and their licensed inspector schedules a visit, checks the attic, the roof and every opening, and completes and signs the form.
  3. Gather your records. Find roof permits, product approval numbers, invoices and any shutter, window or garage door paperwork.
  4. Go over the roof answers with us. Once you have the report, we explain the roof deck attachment, roof to wall, secondary water resistance and roof covering answers, and if a repair or a code compliant replacement could change them, we give you a written estimate.
  5. Plan the work. Financing is available for good, fair and bad credit through Service Finance and Foundation Finance; see roof financing in Orlando. After new roof work, ask your agent whether a new wind mitigation inspection is needed to update your credits.

Why Orlando homeowners call Home Pros

The Good Contractors List $25,000 workmanship guarantee

Home Pros Roofing and Contracting is a member of The Good Contractors List, an exclusive network that approves contractors only after a rigorous vetting process. Very few Florida contractors meet that standard, which is why you will find so few of them listed. Qualifying work is backed by the list's $25,000 third party workmanship guarantee, so you can hire with confidence. View our Good Contractors List profile.

We work on homes all over Orlando, from College Park and Baldwin Park to MetroWest and Lake Nona, plus nearby Pine Hills and Conway, around landmarks like Lake Eola Park, Camping World Stadium and Orlando International Airport. See our Orlando roofing contractor page or our page for a roofer in Lake Nona.

Ready to book? Call 407-766-4388, email [email protected] or send us a message, and we will set up your wind mitigation inspection with a partner inspector and talk through your roof.

Home Pros Roofing and Contracting, 1935 Rafton Rd, Apopka, FL 32703. Phone 407-766-4388. Email [email protected].

Orlando Wind Mitigation FAQs

What is a wind mitigation inspection?

It records the features that help your home resist hurricane winds, such as deck nailing, roof to wall connections, a sealed roof deck, the roof covering and opening protection. A qualified inspector fills in Form OIR-B1-1802, and your insurer uses it to apply any wind mitigation credits it offers.

Can Home Pros set up a wind mitigation inspection for my Orlando home?

Yes. Home Pros arranges wind mitigation inspections through partner companies whose licensed inspectors complete and sign the form. Call 407-766-4388 with your address and your insurer's deadline. As a licensed roofing contractor we then help with the roof side of the report and any roof work it points to.

What changed on the wind mitigation form in 2026?

OIR adopted a revised Form OIR-B1-1802 (Rev. 04/26), and the Florida Department of Financial Services says it must be used for all inspections as of April 1, 2026. It has nine questions instead of seven, adds wind speed region and roof slope, splits the building code question, and spells out the photos or documents each answer needs.

How long is a wind mitigation report good for?

Up to five years, provided no material changes are made to the structure and no inaccuracies are found on the form. After a new roof or new opening protection, ask your agent whether a new inspection would update your credits.

Will a new roof improve my wind mitigation report?

It can change the roof answers, but no result is promised. A permitted reroof with a current product approval helps the roof covering question, and on many older homes the tear off is the time to add deck nailing and a secondary water barrier. The inspector still verifies every answer, and credits depend on your insurer.

What is secondary water resistance on the form?

The form calls it a sealed roof deck: a layer that keeps water out if the roof covering blows off, such as fully adhered self adhering underlayment or taped deck seams. Standard underlayment or hot mopped felt alone does not qualify.

Does a hip roof count on the wind mitigation form?

Only when other roof shapes, such as gable ends, make up no more than 10 percent of the total roof perimeter. Porch and carport roofs attached only to the fascia or wall over open space are left out of that measurement.

Is a wind mitigation inspection the same as a 4 point inspection?

No. A 4 point inspection reports the age and condition of the roof, electrical, plumbing and heating and cooling so an insurer can decide whether to write the home. A wind mitigation inspection records wind resistant features for premium credits. Many insurers ask for both, and we fill out Citizens and insurance roof inspection forms for the roof part.

Do I need a permit to reroof in Orlando, and does it matter for the report?

Yes, from the City of Orlando or, outside city limits, from Orange County through Fast Track. The permit date and product approval number answer the roof covering question, and the city's dry in inspection and final affidavit document deck nailing and the secondary water barrier.

Is My Safe Florida Home open right now?

Its status changes often. As of mid November 2026, WFLX reported that the applicant portal was temporarily closed for website improvements and expected to relaunch on December 4, with existing applications kept secure. Check mysafeflhome.com for the latest before you plan around the program.

Sources

Call 407-766-4388Or get an online estimate